Ratoc Systems Ultra SCSI (FAST-20) Card Bus PC Card REX-CB31 Guia do Utilizador

Ultra SCSI (FAST-20) CardBus PC CardCB31UUser’s Guide March 2005Rev. 4.0

Windows9582. Setup2-1-2. Confirming the Installation1. Click My Computer with the right button.2. Select Properties. You will see the System Propertie

989. Registration and Tech-Support 9-1. How to RegisterWe highly recommend to register yourself as our customer through our on-line registration.1. On

99 10.Options10. OptionsOptinal SCSI cables are available (sold separately) at the web site:http://www.firewiresho

10011. Specifications11. Specifications Specifications of the CB31USCSI Interface•Ultra SCSI (FAST-20)•Single endedSCSI PC Card•PC Card Standard Compl

101 11. Specifications21151431611102423122513PIN SIGNAL PIN SIGNAL1 REQ 14 GND2 MSG 15 C/D3 I/O 16 GND4 RST 17 ATN5 ACK 18 G

AppendixTrademarks-Windows and MS-DOS are registered trademarks of Microsoft Corporation.-AdvanSys is a registered trademark of ConnectCom Solutions,

Windows9592. Setup7. Click on the General tab. If This Device is working properly appears under Device status, youinstalled the CB31U driver correctly

Windows95102. Setup2-2-1. Installing the CB31U on Windows 981. Check to see if your PCMCIA Controller supports CardBus PC Cards.a. Click My Computer w

Windows982. Setup11 If you find a PCIC or compatible PCMCIA controller string under the PCMCIA socket, yourPC Card slot may not be able to use CardBu

Windows982. Setup12b. When the following window appears, select Search for the best driver for your device (Recommended) and click Next.3. When the

Windows982. Setup13c. When the following window appears, check Floppy disk drives or CD-ROM drive and click Next.d. When the following window appears,

Windows982. Setup14f. When the following window appears, click Finish.g. Wait until the PC Card (PCMCIA) icon appears on the Windows taskbar. This ico

Windows982. Setup15When you select one of the other drivers.If AdvanSys PCI SCSI Host Adapter appears instead of SCSI CardBus PC Card REX CB31under Th

Windows982. Setup165. You will see the followingwindow. Click Finish.3. SCSI CardBus PC Card REX CB31 will appear. Click Next.4. You will see the fo

Windows982. Setup172-2-2. Confirming the Installation1. Click My Computer with the right button.2. Select Properties. You will see the System Properti

CB31U1. Introduction...1 1-1. Package Confirmation ...

Windows982. Setup182-2-3. Removing the CB31UWhen you want to remove the CB31U from the PC, you have to follow these steps through.1. Click the PC Card

19Windows Me2. Setup2-3. Windows Me SetupHere’s how to get started with the CB31U and SCSI devices on Windows Me:1. Check the restrictions before you

20Windows Me2. Setupe. Double-click the CardBus controller name string to show the property windows. If This device is working properly appears und

21Windows Me2. Setup3. When the Add New Hardware Wizard Window Appearsa. When the Add New Hardware Wizard window appears, insert the floppy disk or th

22Windows Me2. Setup2-3-2. Confirming the Installation1. Click My Computer with the right button.2. Select Properties. You will see the System Propert

23Windows Me2. Setup7. Click on the General tab. If This Device is working properly appears under Device status, youinstalled the CB31U driver correct

Windows20002. Setup242-4-1. Installing the CB31U on Windows 20001. Check to see if your PCMCIA Controller supports CardBus PC Cards.a. Click My Comput

Windows20002. Setup25d. Click the Device Manager button.e. Double-click on the PCMCIA adapters string and make sure there is a CardBus controller name

Windows20002. Setup26f. Double-click the CardBus controller name string to show the property windows. If This device is working properly appears un

Windows20002. Setup274. You will see the screenbelow.Click Ye s to restart.5. Click My Computer with right but-ton and select Properties.You willsee

1. Introduction11. IntroductionThis User’s Guide describes how to install, use, and troubleshoot the RATOC CB31U Ultra SCSI CardBus PCCard(called CB31

Windows20002. Setup287. You wll see the screen below. You will find This device is working properly under the Device status.If Device status is error

Windows20002. Setup299.You will see the screenbelow.Click Next.10.You will see the screen be-low. Check “Search for asuitable driver for mydevice(Reco

Windows20002. Setup3012.You will see the screen below.Click Next.13.You will see the screen below. Ignore this message and just click Yes .

Windows20002. Setup3114.You will see the screen below. Remove the floppy disk and click Finish.15.Click the Driver tab on the SCSI PC Card REX CB31 WI

Windows20002. Setup3216. If you find a SCSI PC Card REX CB31 WIN2000 string under the SCSI and RAID controllers in the Device Manager, the CB31U

Windows20002. Setup332-4-2. Confirming the Installation1.Click My Computer with right button and select Properties.You will see the screen below. Cl

Windows20002. Setup343. You will see the screen below.Click the General tab.Make sure Device status is “This device isworking properly. ”.4.Click Dri

Windows20002. Setup355.Click the Resources tab and Makesure Conflicting device list is Noconflict.2-4-3. Removing the CB31UWhen you want to remove the

WindowsXp2. Setup362-5. Windows Xp SetupHere’s how to get started with the CB31U and SCSI devices on Windows Xp:1. Check the restrictions before you i

WindowsXp2. Setup37d. Click the Device Managerbutton.e. Double-click on thePCMCIA adaptersstring and make surethere is a CardBus con-troller name s

2. Setup22. SetupWhen you use Windows 95, go to Chapter 2-1.When you use Windows 98, go to Chapter 2-2.When you use Windows Me, go to Chapter 2-3.When

WindowsXp2. Setup38f. Double-click the CardBus controller name string to show the property windows. If This device is working properly appears unde

WindowsXp2. Setup394. Click My Computer with right button and select Properties. You will see the screen below. Click theHardWare tab. And click on th

WindowsXp2. Setup406. You will see the screen below. You will find This device is working properly under the Device status.If Device status is error,

WindowsXp2. Setup418. Select Install from a list or spe-cific location and click Next.9. Select Don’t search. I willchoose the driver to install andcl

WindowsXp2. Setup4211. Type CD-ROM drive letter.(Type A:\, if you insert floppydisk.) and click Next.12. Click Next.13. Click Continue Anyway on thiss

WindowsXp2. Setup4314. You will see the screen below. Take out the floppy disk or the CD-ROM and click Finish.15. Click the Driver tab and make sure i

WindowsXp2. Setup4416. If you find a SCSI PC Card REX CB31 under the SCSI and RAID controllers on the DeviceManager, the CB31U is recognized.

WindowsXp2. Setup452-5-2. Confirming the Installation1. Click My Computer with rightbutton and select Properties.You will see the screen below.Click t

WindowsXp2. Setup463. Click the General tab. Make sureDevice status says “This deviceis working properly. ”.4. Click Driver tab and Driver details but

WindowsXp2. Setup475. Click the Resources tab andMake sure No conflict is shownat Conflicting device list.2-5-3. Removing the CB31UWhen you want to re

Windows9532. Setup2-1. Windows 95 Setup Here’s how to get started with the CB31U and SCSI devices on Windows 95:1. Check the restrictions before

483. Using SCSI devices3. Using SCSI devices3-1. Connecting the SCSI device1. Attach an external active terminator to the SCSI device, as shown below.

493. Using SCSI devices5. Attach the SCSI connector on the other end of the SCSI cable into a SCSI device. If you have a SCSI device with a DB 25-

503. Using SCSI devices3-2. Confirming SCSI device Connection1. Open Device Manager.2. Make sure the SCSI device name string appears in the Device Man

514. SCSI Format Utility 4. SCSI Format UtilityYou can format a HDD, Jaz, MO, Zip drive, etc., with format utility named REXFMT95.EXE. NOTE: You can n

524. SCSI Format Utility6.You will see the window below. Select [Initialize/Format media] from the [Edit] menu.7.You will see the window below. Choose

534. SCSI Format Utility8. a. If you have selected IBM-PC/AT FDISK Format at the step 7., the message box saying [You should create partition n

MS-DOS545. How to install Windows 95/985. Installing Windows 95/98This chapter explains how to make a startup floppy disk, how to access to a SCSI CD-

MS-DOS555. How to install Windows 95/98 4.You will see the screen below. Select Full in Format type and Check Copy system files.5.Click the Start butt

MS-DOS565. How to install Windows 95/985-2. Making a Windows 95 startup floppy diskThis section gives you information on how to make a startup flopply

MS-DOS575. How to install Windows 95/985-3. Making a Windows 98 startup floppy diskThis section gives you information on how to make a startup flopply

Windows9542. SetupIf you find a PCIC or compatible PCMCIA controller string under the PCMCIA socket, your PCCard slot may not be able to use CardBus P

MS-DOS585. How to install Windows 95/98----------------------------- CBENABLE.EXE parameter -------------------------- Format: DEVICE = <director

MS-DOS595. How to install Windows 95/98--------------------------- ASPCB3x.SYS parameter ------------------------------ Format: DEVICE = <dire

MS-DOS605. How to install Windows 95/98----------------------------- REXCD.SYS parameter ------------------------------ REXCD.SYS is a CD-ROM driver

MS-DOS615. How to install Windows 95/98--------------------------- REXDISK.SYS parameter ------------------------------ REXDISK.SYS is a driver fo

Windows20006. How to install Windows 2000626. Installing Windows 2000This chapter explains how to install Windows 2000 from a SCSI CD-ROM connected to

Windows20006. How to install Windows 2000636-2. Install a new copy of Windows 2000Follow these steps through:1.Format the HDD where you want to instal

647. Linux Linux7. Linux7-1. How to install the driver for Linux This chapter explains how to install the CB31U driver for Linux. To install th

657. Linux Linux 3.Make driver module (1)Copy the driver source file (cb31_cb.c)Copy the driver source file named cb31_cb.c to the directory

667. Linux Linux 4.Install the driver module (1)Copy the driver module file (cb31_cb.o)Copy the driver module file named cb31_cb.oto the direc

677. Linux Linux7-2. SCSI Configuration Utility for Linux:ascconfThis section explains the instructions to set up the CB31U SCSI Configuration Ut

Windows9552. Setupc. Double-click the CardBus controller name string to show the property window. If This device is working properly appears under

687. Linux Linux* Restriction To execute ascconf To execute ascconf, the driver modules of the CB31U need to be loaded. If the modules are not

697. Linux Linux --disc5=off : disable Disconnect only with SCSI-ID 5 --sync_all=<20 | 10 | 5 | async> To set Transfer rate

708. Troubleshooting8. Troubleshooting8-1. Deleting the CB31U driver completelyIf you use Windows 95/98/Me, refer to Chapter 8-1-1.If you use Windows

718. Troubleshooting3. Remove the registry.a. Select Run on the start menu.b. Type REGEDIT in the Open box.c. Click HKEY_LOCAL_MACHINE, Enum and PCI.d

728. Troubleshooting8-1-2. Deleting the CB31U driver on Windows 2000If you failed to install the CB31U driver and want to re-install it from the start

738. Troubleshooting3. Remove the registry.a. Select Run on the start menu.b. Type REGEDIT in the Open box.c. Click HKEY_LOCAL_MACHINE, SYSTEM, Curren

748. Troubleshooting8-1-3. Deleting the CB31U driver on Windows XpIf you failed to install the CB31U driver and want to re-install it from the start,

758. Troubleshooting3. Remove the registry.a. Select Run on the start menu.b. Type REGEDIT in the Open box.c. Click HKEY_LOCAL_MACHINE, SYSTEM, Curren

768. Troubleshooting8-2. Updating the CB31U driver for Windows95/98/Me1. Download the updated driver from the RATOC web site.(http://www.ratocsystems.

778. Troubleshootinge. Click on the Properties button, then select the Driver tab.f. Check the date before updating the driver.g. Click on the Update

Windows9562. Setup4. When the Update Device Driver Wizard Window Appearsa. When the Update Device Driver Wizard window appears, insert the CD-ROM or

788. Troubleshooting4. To update the driver for Windows 95.a. When the Update Device Driver Wizard window appears, insert the floppy disk made in the

798. Troubleshootingc. If a message requesting insertion of a floppy disk appears, click OK.d. When Copying Files... appears, you will see a message p

808. Troubleshooting4. To update the driver for Windows 98.a. When the Update Device Driver Wizard window appears, click Next.b. When the following w

818. Troubleshootingc. When the following window appears, check Floppy disk drives and insert the floppy disk made in thestep 2. Make an updated supp

828. Troubleshootingf. When the following window appears, click Finish. You have finished updating the driver.g. Remove the support floppy disk from t

838. Troubleshooting4. To update the driver for Windows Me.a. When the Update Device Driver Wizard window appears, select Specify the location of thed

848. Troubleshootingc. When the following window appears, select The updated driver(Recommeded) and click Next.d. When the following window appears,

858. Troubleshootinge. When the following window appears, click Finish. You have finished updating the driver.f. Remove the support floppy disk from t

868. Troubleshooting5. Verify the driver is updated.a. In the SCSI CardBus PC Card REX CB31 properties window, click the Driver tab.b. Make sure the d

878. Troubleshooting8-3. If your laptop is made by TOSHIBAI can use 16-bit PC Card with my laptop made by TOSHIBA, but I can not get a CardBus PC Card

Windows9572. Setupc. If a message requesting insertion of a floppy disk appears, click OK.d. When Copying Files... appears, you will see a message pro

888. Troubleshooting6. SCSI Configuration windows will appear. If you connect FUJITSU MO(M2512A, M2513A), select10MB/sec.at Translation. If you connec

898. Troubleshooting SCSI Configuration Utility Window[PCI Burst Mode]Default is Enable. If the PC does not support PCI Burst Mode, check Disable.[Par

908. Troubleshooting8-4-2. SCSI Configuration Utility for Windows 2000/XpThe CD-ROM which comes with the CB31U includes a SCSI configuration utility.

918. Troubleshooting SCSI Configuration Utility Window[PCI Burst Mode]Default is Enable. If the PC does not support PCI Burst Mode, check the Disable

928. Troubleshooting8-5. ? PCMCIA Card Services appearsThere is “? PCMCIA Card Services” appears under Other devices in Device Manager.This is not err

938. Troubleshooting8-9. Unknown Device Window appearsWhen I connect a SCSI Scanner to the CB31U and start PC, the Add New Hardware Wizardsaying [This

948. Troubleshooting8-10. When you can not finish Windows 95/98If your PC has an USB port and PC Card inserted at the same time, you may not be able t

958. Troubleshooting6. Select the Resources tab and remove the check mark at the Use automatic settings.And double- click Input/Output Range.7. Set

968. Troubleshooting8-11. Slow access to Ultra SCSI hard diskAccess to the Ultra SCSI hard disk is slower than that to the Fast SCSI hard diskAccess s

978. Troubleshooting8-13. When you can not assign a drive letterI can find the device name string in the Device Manager, but the drive icon does not a